For a limited time, get 10% OFF ALL SERVICES up to $450!

*restrictions apply

NOW OFFERING HANDYMAN SERVICES!

How to Remove a Toilet Seat?

How to Remove a Toilet Seat ()

It’s Time for a Change: Removing Your Toilet Seat with Ease

So, you’ve decided it’s time to swap out that old, worn-out toilet seat. Maybe it’s cracked, stained, or just doesn’t match your bathroom vibe anymore. Whatever the reason, removing a toilet seat is a quick and simple project that can make a big difference. Let’s dive into the process and get that seat off so you can refresh your bathroom look!

Removing a toilet seat may seem like a straightforward task, but it can become challenging depending on the type of seat and bolts used. This detailed guide will walk you through the process, ensuring you can remove your toilet seat quickly and safely, regardless of the situation.

Why and When You Should Remove a Toilet Seat

Over time, toilet seats can become damaged, discolored, or simply outdated. You might need to remove a toilet seat for various reasons, including:

  • Cracks and Breaks: A cracked or broken toilet seat is uncomfortable and unsanitary. It can also pose a safety risk, as the seat may move unexpectedly or cause discomfort during use.
  • Stains and Discoloration: Unsightly stains can make your bathroom look dirty, no matter how clean it is. Discolored seats can also be unappealing and give off the impression of poor hygiene, which is especially concerning in a frequently used area like the bathroom.
  • Upgrading: You may want to replace your current seat with a more comfortable or stylish one. Upgrading your toilet seat can be a quick way to refresh the look of your bathroom without a major renovation.
  • Loose or Wobbly Seat: A loose toilet seat can be a nuisance and may indicate that it’s time to replace it. Wobbly seats can also be a safety hazard, as they may slip or shift while in use, potentially causing injury.

Removing a toilet seat is also a necessary step if you are deep-cleaning your bathroom or performing maintenance on the toilet itself. This can include tasks like replacing the wax ring, repairing the toilet flange, or simply giving the toilet bowl a thorough cleaning which is difficult to achieve with the seat in place.

What You’ll Need to Get the Job Done

Before we get started, make sure you have these tools ready:

  • Screwdriver: Flathead or Phillips, depending on your toilet seat bolts.
  • Pliers: For holding the nut while you unscrew the bolt.
  • Rust Penetrant: Optional, but handy if you’re dealing with stubborn, rusty bolts.
  • Socket Wrench: Useful for older, metal bolts that need extra leverage.
  • Hacksaw: For those bolts that refuse to budge.
  • Protective Gloves: Keep those hands safe!
  • Cleaning Supplies: A sponge and mild cleaner to tidy up once the seat is off.

Understanding Different Types of Toilet Seats and Bolts

Before you start, it’s essential to understand the type of toilet seat and bolts you have. Most toilet seats are secured with plastic or metal bolts. Plastic bolts are easier to work with but can strip easily, while metal bolts are more durable but prone to rust. Knowing the type of bolts you’re working with can help you choose the right tools and approach for removal.

Step-by-Step Guide to Removing a Toilet Seat

Step 1: Finding the Right Fit- Round or Elongated?

Before you go full speed ahead, make sure you’ve got the right replacement seat. Toilet bowls come in two shapes—round and elongated. Here’s how to measure:

  1. Measure from the center of the bolts to the front edge of the toilet bowl. A round bowl measures about 16 ½ inches, while an elongated one will be around 18 ½ inches.
  2. Choose a seat that matches your measurements. Easy, right?

Step 2: Getting Down to Business- Removing the Old Seat

Ready to tackle the old seat? Let’s go step-by-step:

  1. Locate the Bolts: Look for the two bolts at the back of the toilet seat, holding it to the bowl. These are your targets.
  2. Remove the Bolt Covers: If there are plastic covers, gently pop them open with your fingers or a screwdriver.
  3. Loosen the Bolts: Use a screwdriver to turn the bolts counterclockwise while holding the nuts underneath with pliers. Do you have rusty bolts? Spray them with rust penetrant and wait a few minutes before trying again. If the bolts are really stubborn, don’t be afraid to bring out the hacksaw. Just be careful to protect the porcelain with a putty knife while you cut.
  4. Lift Off the Seat: Once the bolts are out, lift the seat straight up. If it’s stuck, wiggle it gently or use a putty knife to help it along.

Step 3: Clean It Up- Prepping for the New Seat

With the old seat gone, it’s a good idea to clean up the area.

  1. Clean Around the Bolt Holes: Use a bathroom cleaner and a sponge to scrub away any dirt or residue. This will ensure your new seat sits nice and snug.
  2. Check for Damage: Take a quick look for any cracks or chips in the toilet bowl. If you find any, you might need to call a professional before installing the new seat.

Step 4: The Grand Finale- Installing Your New Seat

Now that everything is clean and ready, it’s time to put on the new seat!

  1. Position the New Seat: Align the new seat over the bolt holes. Make sure it’s centered and sitting evenly on the bowl.
  2. Insert the Bolts: Push the new bolts through the holes and hold the nuts underneath.
  3. Tighten It Up: Use your screwdriver to tighten the bolts securely, but don’t overtighten! You don’t want to crack the new seat or the toilet bowl.

Step 5: Final Touches- Making Sure Everything is Just Right

Almost done! Just a couple of checks before you finish:

  1. Check the Alignment: Make sure the seat is straight and centered. Adjust as needed.
  2. Test It Out: Open and close the seat a few times to make sure everything is secure and working smoothly.

That’s It! Your Bathroom is Looking Better Already

See? That wasn’t so hard! Removing and replacing a toilet seat is a quick DIY project that can make a big impact on your bathroom’s look and feel. Whether you’re dealing with a wobbly seat, an outdated design, or just ready for a change, these simple steps will have your bathroom looking fresh in no time.

But hey, if you’re not in the mood to tackle this on your own, or if you run into any issues along the way, don’t hesitate to reach out. At Bowers Plumbing & Remodel, we’re not just about fixing problems—we’re here to make your life easier. Whether it’s something as simple as swapping out a seat or a complete bathroom overhaul, we’ve got the expertise and the passion to get the job done right.

Ready to upgrade your bathroom? Give us a call at (253) 993-1959. Let’s chat about how we can transform your space, one project at a time. We’re available 24/7 for all your plumbing needs—because your comfort and satisfaction are our top priorities.

Frequently Asked Questions

Locate the bolts at the back of the seat, unscrew them with a screwdriver while holding the nuts underneath with pliers, and lift the seat off.

Look for hidden plastic covers near the hinges. Pry them open with a flathead screwdriver to access and remove the screws underneath.

Use a screwdriver to turn the bolts counterclockwise while holding the nut beneath with pliers. If they’re stuck, apply some rust penetrant and try again.

Some hinges have quick-release buttons or tabs—press or slide these to detach the seat from the hinges. If not, unscrew the bolts connecting the seat to the hinges.

Apply rust penetrant to the bolts and let it sit for a few minutes. If they still won’t move, carefully cut them off with a hacksaw, making sure to protect the toilet bowl with a putty knife.

Share the Post:

Check out our related posts

VISIT US

14611 Meridian E #A
Puyallup, WA 98375

CONTACT US

Main Phone: (253) 268-1211

Alternate Phone: (253) 218-1410

Email us: [email protected]

Follow Us on 

BUSINESS HOURS

OFFICE HOURS: 8:00 AM to 5:00 PM

24/7 Emergency Service

LIC# BOWERPL854MA

© 2024 The content on this website is owned by us and our licensors. Do not copy any content (including images) without our consent.